Your shopping cart is empty!

Installation Instructions

Step 1: Prepare the surface by cleaning off any dirt or grime with warm and soapy water. Rinse and dry thoroughly.

Step 2: Position the decal where you want it to be applied. Next, stick the decal to the surface using a piece of masking tape across the top of the decal.

Step 3: Lift up the decal and remove the backing tape from the decal, thus exposing the adhesive side of decal.

Step 4: Carefully apply the decal. Using a credit card or a squeegee, rub the decal to remove any air bubbles. Work from the middle of the decal towards the outside.

Step 5: Peel off the masking tape. Then carefully remove the application tape. Keep the application tape almost parallel to the surface when removing it. If any part of the decal starts to peel with it, re-apply and rub that area some more to ensure a proper bond between the decal and the surface.

Step 6. Inspect the decal for stubborn air bubbles. Using a sharp pin, puncture the air bubble and carefully squeegee the air out. Any minor air bubbles that persist will eventually go away.

About Us | Shipping | Customer Gallery | Installation Instructions | Contact Us
Copyright © 2007-2014 TunerDecals.com. All Rights Reserved.